I want to replace the backgrounds on some of my designs using the 'replace' feature.
I've loaded the designs in and setup the categories. It's working well except they are not positioned correctly in the layout when imported.
The backgrounds are all exactly the same size and it doesn't matter what values I put into the "left and right" (screenshot attached) the background are always imported into the same position which isn't right.
Just updating this for anyone who has the same issue.
The X, Y origin of the image I wanted to replace was set to 'Top' and 'Left'. By changing the X, Y origin to 'Centre' and 'Centre' the image would replace in the correct position.
Just updating this for anyone who has the same issue.
The X, Y origin of the image I wanted to replace was set to 'Top' and 'Left'. By changing the X, Y origin to 'Centre' and 'Centre' the image would replace in the correct position.
R
Rhiannon Doyle
said
over 3 years ago
No problem, if you don't get anywhere I can send you screenshot of my settings.
C
Christian McMinn
said
over 3 years ago
Tried that, think I've tried everything haha
Thanks for your help I think I might open a ticket.
R
Rhiannon Doyle
said
over 3 years ago
Yes I have a background similar to yours that I'm replacing using replaceBackground. Try changing Scale By to dimensions - enter the dimensions and scale mode Fit.
C
Christian McMinn
said
over 3 years ago
No it's not checked, although I did try it to see what it would do but nothing happened – still ended up in the same position.
Are you using the 'replace' feature to get those results? It centres when I just place a design in but when I use the replace feature it still goes off canvas.
R
Rhiannon Doyle
said
over 3 years ago
I've just double checked this. left=0 and top=0 will position out of the canvas (I assume this is a bug?).
In my 800x800 canvas, left=400 and top=400 will center it.
R
Rhiannon Doyle
said
over 3 years ago
Have you got auto-center checked?
C
Christian McMinn
said
over 3 years ago
Sure no problem, it looks like the bottom right hand corner of the background is being centred. The first image is the original then the second has the background replaced.
R
Rhiannon Doyle
said
over 3 years ago
Can you screenshot the position they're imported into?
Christian McMinn
I want to replace the backgrounds on some of my designs using the 'replace' feature.
I've loaded the designs in and setup the categories. It's working well except they are not positioned correctly in the layout when imported.
The backgrounds are all exactly the same size and it doesn't matter what values I put into the "left and right" (screenshot attached) the background are always imported into the same position which isn't right.
Any help would be appreciated.
Christian
Just updating this for anyone who has the same issue.
The X, Y origin of the image I wanted to replace was set to 'Top' and 'Left'. By changing the X, Y origin to 'Centre' and 'Centre' the image would replace in the correct position.
- Oldest First
- Popular
- Newest First
Sorted by Newest FirstChristian McMinn
Just updating this for anyone who has the same issue.
The X, Y origin of the image I wanted to replace was set to 'Top' and 'Left'. By changing the X, Y origin to 'Centre' and 'Centre' the image would replace in the correct position.
Rhiannon Doyle
No problem, if you don't get anywhere I can send you screenshot of my settings.
Christian McMinn
Tried that, think I've tried everything haha
Thanks for your help I think I might open a ticket.
Rhiannon Doyle
Yes I have a background similar to yours that I'm replacing using replaceBackground. Try changing Scale By to dimensions - enter the dimensions and scale mode Fit.
Christian McMinn
No it's not checked, although I did try it to see what it would do but nothing happened – still ended up in the same position.
Are you using the 'replace' feature to get those results? It centres when I just place a design in but when I use the replace feature it still goes off canvas.
Rhiannon Doyle
I've just double checked this. left=0 and top=0 will position out of the canvas (I assume this is a bug?).
In my 800x800 canvas, left=400 and top=400 will center it.
Rhiannon Doyle
Have you got auto-center checked?
Christian McMinn
Sure no problem, it looks like the bottom right hand corner of the background is being centred. The first image is the original then the second has the background replaced.
Rhiannon Doyle
Can you screenshot the position they're imported into?
-
Adding Fancy Products to Categories
-
Shortcode for specfic product designer
-
What theme is recommended to use with FPD ?
-
Exclude Image from export
-
Google Font Family adds extras
-
Floating Dialog box
-
Uploadzone not working
-
Image transparency like in T-shirt demo
-
How do I get clipart
-
What does the LOAD button do / what is it for?
See all 2194 topics